The Scrignotech counterframe is the result of Scrigno's thirty years of experience, which guarantees a high level of quality, and is available in standard sizes.

How to recognise the original

The "S tech" mark is visible on the sliding track even when the product is assembled.

10-year warranty on the sliding system.

Load capacity 100 kg

Protective film

The slide is supplied with an exposed protective film that protects against splashes of cement mortar or other impurities that could impair the door's ability to slide. A useful protection for the installer during installation.

Plasterboard subframe

The casing frame is made of galvanised steel, 0.5 mm thick in the side/back profile and 0.8 mm for the top/bottom profiles.

The side of the box is made of a single piece of sheet metal and has vertical corrugations with a 100 mm pitch.

The corrugation gives the structure greater rigidity. There are also horizontal 0.6 mm galvanised steel profiles on the side, which serve both to reinforce the structure and to facilitate the application and fixing of the plasterboard sheet using the screws provided as standard.

The subframe is equipped with two plug-in spacers required for installation.

The sliding system consists of:

an aluminium guide profile with PVC side profiles delimiting the thickness of the finished wall. On the wooden upright side, the crossbar is fixed by means of pre-assembled nails, while on the cassette side it is push-fit.

A pair of ball-bearing carriages with a load capacity of 100 kg. The carriages are equipped with bolts, suspension brackets and stop for mounting the door panel.